Wsus Management Console Windows 10

by
Wsus Management Console Windows 10 Rating: 3,5/5 2868 reviews

Hello, i have a Windows 10 client updated to 1709 version with the Remote Sever Administration Tools installed (WindowsTH-RSATWS1709-x64). I would like to connect to the my Windows 2016 WSUS server from my Windows 10 client using the Windows Server Update Services tool installed with RSAT. # Prompt to check products are set correctly write-host 'Before continuing, please open the WSUS Console, cancel the WSUS Configuration Wizard,' - -ForegroundColor Red write-host 'Go to Options Products and Classifications, and check that the Products are set correctly.' - -ForegroundColor Red write-host 'Pausing script' -ForegroundColor. Hi, in this post I will describe all steps to install a Windows Update Server at top an a Windows Server 2012R2 to fully support the Windows 10 Feature updates. First of all install a Windows Server 2012R2 and install all updates. Especially KB2919355 is requiered. Windows Server2008 R2 with WSUS 3 SP2 only support Windows 10 Updates, not Features. To install WSUS simply enable the.

Wsus Management Console Windows 10 Download

Symptoms

When you try to use the Microsoft Windows Server Update Services (WSUS) SelfUpdate service to send automatic updates to client computers, the client computers do not receive the updates. Additionally, the client computers do not report to the WSUS server.
When this occurs, the WSUS Administration console logs the following error message:

Check your server configuration. One or more Update Service components could not be contacted. Check your server status and ensure that the Windows Server Update Service is running.
Non-running services: SelfUpdate

The event log may also include the following event:

Cause

This problem may occur if one or more of the following conditions are true:

Install Wsus Management Console Windows 10

  • The permissions on the C:Program FilesUpdate ServiceSelfUpdate directory are missing or incorrectly configured, or the IUSR_ComputerName account has been removed from the Users group.

  • The SelfUpdate virtual directory is missing from the WSUS server.

  • The SelfUpdate virtual directory is not configured for the default site on port 80.

  • The SelfUpdate virtual directory does not have anonymous access permissions.

  • The default Web site is configured to use specified IP addresses and is missing an entry for 127.0.0.1.

  • The default Web site does not have anonymous access permissions.

  • The WSUS server also has Microsoft Windows Sharepoint Services installed. /geforce-9500-gt-drivers-for-mac.html. The WSUS resources have not been excluded from Sharepoint management.

  • The Selfupdate.msi installation was defective. Therefore, files are missing from the ~Selfupdate subfolders.

Resolution

To resolve this problem, you must have the following minimum permissions on the C:Program FilesUpdate ServiceSelfUpdate directory.

Group

Permissions

Administrators

Full Control

System

Full Control

Domain/Users or Local/Users

Read&Execute, Read, List Folders

IUSR_ComputerName

Read&Execute, Read, List Folders

Note IUSR_ComputerName represents the host name of the server that is running IIS where WSUS is installed. If this account is a member of the Users group, you do not have to explicitly define these permissions.
To resolve a problem where the SelfUpdate virtual directory is missing or there is no SelfUpdate virtual directory listed under the Web site that is bound to port 80, run the Selfupdate.msi file that is located in the Program filesUpdate servicesSetup folder.
To resolve issues where the SelfUpdate virtual directory does not have anonymous access permissions, open IIS Manager, expand the default Web site, right-click the SelfUpdate virtual directory, and then click Properties. On the Directory Security tab, click edit under Authentication and access control. Make sure that anonymous access is enabled.
Note This step should be performed for the default Web site as well. The SelfUpdate tree does not work if you have a Web site that is bound to a specific IP address in your IIS configuration. The workaround is either to set your IIS configuration to respond to 'All unassigned' addresses or to add 127.0.0.1 to the list of IP addresses used for SelfUpdate.

Use Internet Information Services (IIS) Management console to verify that the server is set up with one of the following two configurations.

Configuration 1: WSUS is installed on the default Web site


Configure the default Web site by using the following settings: Best download manager for mac os catalina.

  • SelfUpdate

  • Content

  • ClientWebService

  • SimpleAuthWebService

  • WSUSAdmin

  • ReportingWebService

  • DssAuthWebService

  • ServerSyncWebService

Configuration 2: WSUS is installed on a custom Web site

Configure the default Web site on port 80 by using the following settings:

  • SelfUpdate

  • ClientWebService

Configure WSUS Administration on port 8530 with the following settings:

  • SelfUpdate

  • Content

  • ClientWebService

  • SimpleAuthWebService

  • WSUSAdmin

  • ReportingWebService

  • DssAuthWebService

  • ServerSyncWebService

Regardless of the configuration that you select, you must also verify the following settings:

  • You must configure the SelfUpdate virtual directory under the default Web site or any other Web site to listen on Port 80.

  • The SelfUpdate virtual directory points to C:Program FilesUpdate ServiceSelfUpdate.

  • The WSUSAdmin virtual directory is the only virtual directory in IIS that should have security set to Integrated Windows Authentication. Set all other virtual directories security to Anonymous Access Enabled.

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the 'Applies to' section.

More Information

When you use IIS, you can move the SelfUpdate directory to a different Web site. To do this, follow these steps:

  1. Click Start, click Run, type Control admintools, and then double-click
    Internet Information Services (IIS) Manager.

  2. Expand the Web Sites folder, and then click the WSUS Administration node.

  3. Right-click the SelfUpdate node, point to
    All Tasks, and then click Save Configuration to File.

  4. Type a name for the file and then save the file to another folder. You will use this file in Steps 9 through 12.

  5. Right-click the ClientWebService node, select All Tasks, and then click Save Configuration to File.

  6. Type a name for the file and save the file to the same folder that you used in step 4. You will use this file in steps 13 through 15.

  7. Select the default Web site or another Web site that is running on port 80.

  8. Right-click the Web site, point to New, and then click Virtual Directory (from file).

  9. Select the directory where you saved the SelfUpdate and the ClientWebService .xml files in steps 4 and 6.

  10. Select the SelfUpdate .xml file, and then click Open.

  11. Click Read File, click the SelfUpdate file that is now listed under Select a configuration to import, and then click OK.

  12. In the IIS Manager dialog box, type the name for a new virtual directory in the Alias box, and then click OK.

  13. Select the ClientWebService .xml file, and then click Open.

  14. Click Read File, click the SelfUpdate file that is now listed under Select a configuration to import, and then click OK.

  15. In the IIS Manager dialog box, type the name for a new virtual directory in the Alias box, and then click OK.

  16. If this is a new Web site, start the Web site from IIS Manager. If this is an existing Web site, restart the Web site from IIS Manager.

References

For information about verifying WSUS and IIS configuration settings, visit the following Microsoft Web site:

Wsus management console windows 10 32-bit

http://technet2.microsoft.com/WindowsServer/en/Library/aae0c0a0-0bc7-46f8-b3ea-bc441a3796b41033.mspxFor information about how to troubleshoot client self-update issues, visit the following Microsoft Web site:

http://technet2.microsoft.com/WindowsServer/en/Library/b23562a8-1a97-45c0-833e-084cd463d0371033.mspx?mfr=trueFor information about how to install and configure IIS for use with WSUS, visit the following Microsoft Web site:

http://technet2.microsoft.com/WindowsServer/en/Library/6b2e1035-5b82-45f4-9f51-6cc0ca32fd601033.mspx?mfr=true For more information about automatic updates in Windows, click the following article number to view the article in the Microsoft Knowledge Base:

294871 Description of the Automatic Updates feature in Windows